Kat Scrappiness Blog

Tag: Scor Tape

  • Santa Is Watching Shaker Card

    Santa Is Watching Shaker Card

    Hi Everyone, it’s Tina. I have a fun shaker card to share with you using PhotoPlay Here Comes Santa Patterned Paper, the new Stitched Collage Die along with the Never Ending Rectangles Die. The shaker card is using the Sparkled Clear Confetti Mix. Below is a Process Video showing you how I made this card.

    [youtube https://www.youtube.com/watch?v=aLPAoQm5C8M]

    This card can be used for any occasion by changing the patterned paper, sequin mix and sentiment. Below is a link to all products used. To receive 10% off your order use code: TINA10 at checkout. Thank you for stopping by and have a wonderful day.

    Products Used:


    https://linkdeli.com/widget.js?1533216656914

  • Crafters Essentials 2 Masculine Card

    Hi Everyone, it’s Tina here. Today I have a masculine card to share with you using the Crafters Essentials II. The Crafters Essentials is packed with 8 dies with one being a border die. Below you will find the steps to replicate this card.

    • Step 1 – Trim White Cardstock to 8 1/2″ x 5 1/2″, score at 4 1/4″ and fold for a vertical side fold card. (A2)
    • Step 2 – Trim White Cardstock to 4 1/4″ x 5 1/2″. Apply Distress Oxide Inks to a craft mat. I used Faded Jeans, Broken China and Peacock Feathers. Spray with water to activate the inks. Dip the cardstock into the ink, heat set, then repeat this step until you have reached the desired effect. Let dry before going to the next step
    • Step 3 – Diecut Crafters Essentials 2 (the Border Die) using the Distress Oxide Background. Turn the patterned and diecut it again. Adhere the Distress Oxide Background to Black Cardstock trimmed to 3 7/8″ x 5 1/8″ using Collage Medium. Adhere the whole panel to front of card using Scor Tape.
    • Step 4 – Diecut Crafters Essentials 2 for the following 1) Large Stitched Fishtail Banner using Black Cardstock 2) Long Stitched Fishtail Banner using Diagonal Patterned Paper 3) Starburst using Distress Oxide (or patterned paper). Adhere all the diecuts to the card using Scor Tape.
    • Step 5 – Stamp sentiment using Versafine Onyx Black Ink
    • Step 6 – For accents add a button with yarn to the center of starburst.

    This card can be used for any occasion by changing the colors and/or sentiment. Below is a link to all products used. To receive 10% off your order use code: TINA10 at checkout. Thank you for stopping by and wishing you a wonderful day.

    Kat Scrappiness Products Used:

    https://linkdeli.com/widget.js?1531470176574

  • Stitched Multi Window Frame Card

    Stitched Multi Window Frame Card

    Hi Everyone, it’s Tina here today. Kat Scrappiness has a fabulous Die Set this month called the Crafters Essentials 1. This is packed with 13 dies that are a must have to your collection which can be mixed and matched to create unique cards. For my card I used the Stitched Multi Frame Window and Stitched Fishtail Banner die from this set along with my favorite Double Stitched Rectangles Die. It is topped off with a sentiment from the Everyday Brush Strokes Stamp set. Below are the steps to replicate this card.

    • Step 1 – Trim White Cardstock to 8 1/2” x 5 1/2”, score at 4 1/4”, fold in half for a horizontal side fold card (A2)
    • Step 2 – Diecut Double Stitched Rectangles Die using Patterned Paper. Adhere to front of card using Clear Double Sided Adhesive Tape.
    • Step 3 – Diecut Multi Stitched Frame using White Cardstock. Diecut or Trim Patterned Paper to fit underneath the Multi Stitched  Frame. Place the Multi Stitched Frame in the position you want and adhere the rectangle cutouts using Clear Double Sided Adhesive Tape. Add thin strips of foam tape to the backside of the Multi Stitched Frame and adhere to card.
    • Step 4 – Diecut Stitched Fishtail Banner using Patterned Paper. Add a sentiment using Versafine Onyx Black Ink. Adhere to card using Clear Double Sided Adhesive Tape.
    • Step 5 – Add drops of collage medium adhere Sequins.

    I hope you enjoyed today’s card. This card can be used for any occasion by changing the patterned paper, color and/or sentiment.

    To receive 10% off your order at Kat Scrappiness use code: TINA10 at checkout. Below is a link to all products used. Thank you for stopping by and have a wonderful day!

    Kat Scrappiness Products Used:


  • Stitched Scallop Shaker Card

    Stitched Scallop Shaker Card

    Hi Everyone, it’s Tina here today. I have a fun shaker card to share with you using the new Stitched Scallop Circles Die and Stitched Scallop Rectangles Die with the Sun Kissed Sequins Mix. Below are the steps to replicate this card.

    • Step 1 – Trim White Cardstock to 8 1/2″ x 5 1/2″, score at 4 1/4″ and fold in half for a vertical side fold card.
    • Step 2 – Diecut Double Stitched Rectangles using Patterned Paper. This will be your background.
    • Step 3 – Diecut Stitched Scallop Rectangles Die using Patterned Paper (the Die is one up from Background). Diecut Stitched Scallop Circles slightly higher than mid center. (This is your window).
    • Step 4 – Using Never Ending Circles Die diecut the patterned paper from Step 2 one die bigger than the Stitched Scallop Circle created from Step 3 (make sure to position the window over the patterned paper). Adhere the background to the front of the card. You will need to diecut an acetate sheet with the same size Never Ending Circles Die.
    • Step 5 – Turn over the patterned paper from Step 3 and adhere the acetate using Clear Double Sided Adhesive Tape or Collage Medium. Adhere foam tape all around the circle (2 layers) and to the rest of the panel (2 layers). Use an anti-static powder tool inside the circle at the edges of the foam tape. This will help to remove the stickiness. I have a video of a similar shaker card if you need a visual instruction. You can go here.
    • Step 6 – Add sequins. Remove the release sheet from the foam tape. Adhere the circle backside created from Step 4. Use Clear Double Sided Adhesive to the circle and remove the release sheet. Now adhere the whole panel to the front of the card.
    • Step 7 – Stamp sentiment from Everyday Brush Strokes using Versamark on patterned paper. Sprinkle black embossing powder and heat it using a heat tool. Diecut Stitched Fishtail Banners to the sentiment. Trim the left side of diecut and adhere to card using Clear Double Sided Adhesive Tape.

    This card can be used for any occasion by changing the patterned paper, color and/or sentiment. Below is a link to all Kat Scrappiness Products Used. Thanks for stopping by and have a wonderful day.

    Kat Scrappiness Products Used:

    https://linkdeli.com/widget.js?1529497022105

  • Father’s Day Badge Card

    Father’s Day Badge Card

    Hi Everyone, it’s Tina here today. Father’s Day is right around the corner and Kat Scrappiness has you covered with the new Dad’s Tools Layered Stamp Set and the Stitched Fishtail Banner Dies. I used both to create my card.

    Below are the easy steps to replicate this card.

    • Step 1 – Trim Tan Cardstock to 8 1/2” x 5 1/2”, score at 4 1/4” fold in half for a vertical side fold card (A2)
    • Step 2 – Trim Navy Cardstock to 4” x 5 1/4”. Emboss using an embossing folder of your choice. Adhere to card using Clear Double Sided Adhesive Tape.
    • Step 3 – Diecut Circle using Tan Cardstock
    • Step 4 – Stamp Dad’s Tools sentiment to circle using Versafine Onyx Black Ink.
    • Step 5 – Diecut Stitched Fishtail Banner using Stripe Patterned Paper x 6. Adhere to the backside of circle.
    • Step 6 – Diecut Stitched Fishtail Banner using Tan Cardstock x 2. Adhere to the backside of circle at the bottom. Adhere completed Banner to the front base of card using Clear Double Sided Adhesive Tape.
    • Step 7 – Stamp Dad’s Tools Layered Stamp Set (hammer). Use lightest ink color for solid stamp and as you build it up go a shade darker. Cut out the hammer and adhere to card using Clear Double Sided Adhesive Tape.

    This Badge card can be used for any occasion by changing the image, colors and/or sentiment. To receive 10% off your order at Kat Scrappiness use code: TINA10 at checkout. Thanks for stopping by and have a wonderful day!

    Kat Scrappiness Products Used:


    https://linkdeli.com/widget.js?1526884908235

  • Rainbow Polka Dot Flags Card

    Rainbow Polka Dot Flags Card

    Hi Everyone, it’s Tina here today. The new Stitched Flags dies from Kat Scrappiness are so much fun to play with. Once I selected my rainbow colors for my Stitched Flags I created a simple matching rainbow background using the Distress Oxide Inks. My card is also using the Wonky Wavy Stitched Rectangles Die and Everyday Brush Strokes stamp set for the sentiment. Below you will find the easy steps to replicate this card.

    • Step 1 – Trim White Cardstock to 8 1/2″ x 5 1/2″, score at 4 1/4″, fold in half for a horizontal side fold card (A2)
    • Step 2 – Trim White Cardstock to 4 1/4″ x 5 1/2″. Apply Distress Oxide ink directly to cardstock using a mini blending tool. I applied 5 colors to create a rainbow. The colors I used are Squeezed Lemonade, Twisted Citron, Salty Ocean, Picked Raspberry & Wilted Violet. I sprayed some water to create an oxidized effect. Once dry Diecut Wonky Wavy Stitched Rectangles to the background.
    • Step 3 – Apply anti static powder to the bottom left of the Distress Oxide Ink background. Stamp Everyday Brush Stroke sentiment stamp using Versamark Ink. Sprinkle White Embossing Powder, remove the excess then heat set it with a heat tool. Adhere the background to card using Scor-Tape.
    • Step 4 – Diecut Stitched Flags using Polka Dot Patterned Paper in five colors and 3 sizes each color. Adhere the largest Stitched Flag first using Scor-Tape, then middle size and then small size on top. You may want to layer them first before adhering to figure out the placement.

    I hope you enjoyed today’s card. This card can be used for any occasion by changing the colors and/or sentiment. All products used are linked below. Thanks for stopping by and have a wonderful day!

    Kat Scrappiness Products Used:


    https://linkdeli.com/widget.js?1525438185447

  • 5 Minute Card With Video

    5 Minute Card With Video

    Hi Everyone, it’s Tina here today. The new Stitched Flags dies released this month from Kat Scrappiness makes it super easy to create fast cards. All you need is the Stitched Flags, the Condensed Uppercase Alpha Dies, Patterned Paper and scor-tape. Below I have a video showing you how to make them.

    Below is the video. You can watch it here or open it with YouTube.

    I hope you enjoyed today’s video showcasing the new Stitched Flags Die and Condensed Uppercase Alpha Dies. See below for a list of all Kat Scrappiness products used.

    To receive 10% off your order at checkout Use code: TINA10

    Don’t forget Kat Scrappiness has a challenge every month.  To enter the challenge go here.  Don’t forget to submit your photos at the end of the post “Add Your Link” for a chance to win a $25.00 gift card to Kat Scrappiness! The contest closed at the end of each Month.

    Thanks for stopping by and have a wonderful day!

    Kat Scrappiness Products Used:


    https://linkdeli.com/widget.js?1525091912704

  • Got Coffee Card Plus Video

    Got Coffee Card Plus Video

    Hi Everyone, it’s Tina here today. By now you have seen the new Layered Coffee Cup Build It Die. I have a video below showing you not only how to assemble it but how you can make it into a flip card/tag. This card features the new Layered Coffee Cup Die & Got Coffee Sentiment Die, as well as the Double Stitched Rectangle Die, Wonky Wavy Stitched Rectangles Die, and Distress Oxides, which can all be found at Kat Scrappiness.

    Below is a full video tutorial showing you how to create this card. You can watch below or on YouTube.

    If you want to save the directions on how to assemble the Layered Coffee Cup I have added it below. Just right click on the image and save to your desktop, laptop, tablet or phone.

    I hope you enjoyed today’s card. See below for a list of all Kat Scrappiness products used. Use code: TINA10 to get 10% off your order at checkout.

    Have a great day everyone!

    Kat Scrappiness Product Used:


    https://linkdeli.com/widget.js?1522321046703

  • Have A Hoppy Birthday Card With Video

    Have A Hoppy Birthday Card With Video

    1. Hi Everyone, it’s Tina here today to share a process video for a Hoppy Birthday Card. This card features the new Distress Oxides colors, the Toadally Awesome Stamps and Dies by Lawn Fawn, Crystal Nuvo Drops & the Wonky Wavy Stitched Rectangle Dies which can all be found at Kat Scrappiness.

    Below is a full video tutorial showing you how to create this card. You can watch below or on YouTube.

    I hope you enjoyed today’s card. See below for a list of all Kat Scrappiness products used. Use code: TINA10 to get 10% off your order at checkout.

    Have a great day everyone!

    Kat Scrappiness Products Used:


    https://linkdeli.com/widget.js?1521790330479

  • Boo!

    Boo!

    Greetings! Hannah, from Fanciful Spaces, here! I have been SO excited to share this card with you! This card required a few technical moments, but it harbored a lot of glittery fun! I suspect my nephew will really enjoy it when he receives it. 😉

    I was inspired to create this card after I saw a card with a similar cut through the front panel, the other card was more swoopy and gentle, but I wanted something harsh and fierce looking (the other card didn’t use googly eyes either)! Like the other card I saw, whose lines were more or less perpendicular, I wanted the same effect. These perpendicular lines, along with a sharp 90-degree angle, were quite easy to create with the usage of Kat’s Never Ending Rectangular Dies.

    To start I adhered a sheet of Scor-Tape to a piece of Neenah Solar White in 80lbs. I then cut these out, to create a rectangle, with one of the rectangles from the Never Ending Rectangular Die set, I also cut another sheet of cardstock using the same rectangular die. Then I cut two corners of a rectangle at perpendicular lines using two larger dies from the Never Ending Rectangular Dies.



    I was left with 3 separate pieces of cardstock/Scor-Tape.

    For the top and bottom panels of the Scor-Taped piece, I covered them with Nuvo Scarlet Red Glitter. I made sure that I worked on scratch paper, and I had turned off my ceiling fan. I then put another sheet of scratch paper on top of the glitter and pressed it into the Scor-Tape. Using a pair of tweezers I removed the two pieces, shook the glitter off, and then returned the excess glitter to the container. The use of Scor-Tape kept pretty much all of the glitter in place and prevented glitter from flying about my craft room! It was the most mess-free experience I’d ever had with glitter!

    For the middle section, I applied googly eyes, of a variety of sizes, over it. The remaining Scor-Tape that was still visible I covered with Nuvo Charcol Glitter, using a similar technique to the red portions. At this point, I also colored the other sheet of cardstock that I had cut out. I wasn’t 100% sure all of the areas wouldn’t be seen as I layered the glitter and eyes on it, therefore I colored it using Black Soot Distress Oxide.

    Carefully I traced the glitter pieces onto a sheet of scratch paper and used that to make a pattern in order to cut out 2 layers of black fun foam slightly smaller than the glitter pieces. I adhered the fun foam together using Ranger Multi-Medium Matte. When they were dry I used 1/4″ Scor-Tape to stick my glitter pieces onto the fun foam.

    Next, I used VersaMark Ink to adhere WOW! Clear Gloss Embossing Powder to the edges of a sheet of cardstock that was cut to an A2 size (4.25″ x 5.5″). I only needed to emboss about half an inch around the edges. Carefully, I lined up the glitter and eye sections. Once they were in their correct positioning I applied Ranger Multi-Medium Matte to the fun foam of the top section. I let that sit and dry for a bit, keeping it in its correct position was key to line up the eyes and the bottom section when I went to glue them down.

    Kat used to sell die set by a Cheery Lynn Designs, it had this fabulous “Boo” sentiment. She, unfortunately, doesn’t carry it but she DOES have this “Boo” sentiment by Tonic Studios which would work perfectly! I cut my sentiment out of white cardstock and out of black fun foam. Using Distress Inks I colored the sentiment and then doused it with my Wink of Stella pen. When the sentiment was dry I adhered it to the fun foam with Ranger Multi-Medium Matte and then to the glitter panel. This was all adhered to my card base using a tape runner, and Viola, one of my favorite cards ever was created!

    If you liked this project, feel free to use Hannah10 at checkout! The following are the products I used:

    Kat Scrappiness Never Ending Rectangle Dies
    Scor-Tape Sheets
    Nuvo Scarlet Red Glitter
    Nuvo Charcol Glitter
    Black Soot Distress Oxide
    Ranger Multi-Medium Matte
    Scor-Tape 1/4″
    VersaMark Ink
    WOW! Clear Gloss Embossing Powder
    Boo – Tonic Studios
    Wink of Stella
    Googly Eyes
    Neenah Solar White in 80 and 110lb