Kat Scrappiness Blog

Tag: Stitched Scallop Circle Dies

Hello – Spring Fling Paper
Hello crafters, it’s Caren here on the blog today with a card featuring the new Spring Fling paper.

I choose two coordinating papers from the Spring Fling paper pad. I die cut the striped piece using the largest die from the Stitched Scalloped rectangle dies. I adhered this directly to my black card base. I cut a rectangle from the other coordinating paper and layered it onto a solid piece of yellow paper from the Spring Fling paper pad. I adhered this piece to my card. I stamped and heat embossed the sentiment and floral image from the Friendship Greetings stamp set onto a black circle I die cut using the Never Ending Circle dies. I layered this onto a pink Stitched Scalloped circle. The pink paper is also from the Spring Fling paper pad. I adhered this to the card using dimensional foam adhesive. I added Blank Onyx and Bumble Bee pearls to finish the card.

Thanks for stopping by!

– – – SUPPLIES for today’s project– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Spring Fling paper pad by Kat Scrappiness

Friendship Greeting stamp set by Kat Scrappiness

Stitched Scalloped Rectangle dies by Kat Scrappiness

Stitched Scalloped Circle dies by Kat Scrappiness

Never Ending circle dies by Kat Scrappiness

Black Onyx pearls by Kat Scrappiness

Bumble Bee pearls by Kat Scrappiness
April 7, 2022
Happy Birthday – Flower Sprinkles
Hi, hope everyone is enjoying their weekend. I have a fun shaker card for you today that uses 9 different products from Kat Scrappiness!

I started by inking a background using a stencil and three different colors of distress ink. I then used the Stitched Rectangle dies from Kat Scrappiness to cut out the panel. On that panel, I die cut the two flowers using the Stitched Scalloped Circle dies. For the flower stems, I used one of the stitched dies from Crafters Essentials 1 set.

For the shaker part of my card, I used the purple, blue, and pink flower sprinkles. I cut out a banner using the Stitched Fishtail Banner dies and stamped and heat embossed my sentiment. I attached that to my panel using foam adhesive.

To finish off the card, I added yellow jewels to the center of my flowers and randomly placed white jewels on the card.

Thanks for stopping by and happy stamping! Here is a link to the Kat Scrappiness shop and direct links for products used on this card are below.

– – – Kat Scrappiness products – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
August 17, 2019
Hoppy Easter – Star Fusion Coverplate
Now that Valentine’s Day is past us, I’m focusing on Easter/Spring cards. I lean toward bright colors, so using soft colors for these types of cards is a good change for me.

For today’s card, I’m using the new Star Fusion Coverplate from Kat Scrappiness as my focal point. I die cut it from some striped pink and while patterned paper from my stash. I adhered this to a piece of kraft cardstock. I sprayed the kraft cardstock with shimmer mist to give it some extra shine.

I cut a Stitched Scalloped circle out of white cardstock and a piece of green patterned paper. I then cut the green piece with one of the Fancy Scalloped border dies. I adhered the two pieces together and popped it up on the right side of the card with dimensional adhesive. I then cut of the portion that was hanging off the card. I colored the cute little rabbit and carrot from the Lawn Fawn Hoppy Easter set with Copic markets and adhered it the the scalloped circle with Nuvo adhesive.

For the sentiment piece, I used one of the Stitched Sentiment dies. I heat embossed my sentiment from the Lawn Fawn Hoppy Easter set using white embossing power and adhered it to the card using dimensional adhesive.

– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– –

Use code caren10 for a 10% discount in the Kat Scrappiness shop.

Thanks for stopping by and happy stamping!

– – – SUPPLIES for today’s project– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
February 17, 2019
Life Begins After Coffee Card

Hi Everyone, it’s Tina. Today I am sharing a card I made using the new Peacock Backdrop Die along with the Let’s Get Caffeinated Stamp Set. Below you will find the steps to replicate this card.

Step 1 – Trim White Cardstock to 8 1/2″ x 5 1/2″, score at 4 1/4″ and fold in half for a vertical side fold card. (A2).

Step 2 – Trim Brown Cardstock to 4 1/4″ x 5 1/2″, or create your own using Distress Oxide Ink Walnut Stain.

Step 3 – Diecut Peacock Backdrop to Kraft Cardstock. Remove all the small pieces and adhere to Cardstock from Step 2 using Collage Medium. (I use the Darice Fine Tip Applicator on the Collage Medium for easy application).

Step 4 – Trim Stripe Patterned Paper to 1 3/4″ x 4 1/4″. Adhere to card using Clear Double Sided Adhesive Tape.

Step 5 – Stamp Let’s Get Caffeinated on Kraft Cardstock using Versamark. Sprinkle Copper Embossing Powder and heat set it with a heat tool. Diecut Never Ending Circles to the sentiment. Diecut Stitched Scalloped Circles Die using Brown Cardstock, or create your own using Distress Oxide Ink Walnut Stain. Adhere sentiment to the Stitched Scalloped Diecut using Collage Medium. Adhere the whole panel to the card using foam tape.

Step 6 – For added interest adhere hearts or sequins above the sentiment.

This card can be used for any occasion by changing the image, colors and/or sentiment. Below are links to all the products used. To receive 10% off your order use code: TINA10 at checkout. Thanks for stopping by and have a wonderful day!

Kat Scrappiness Products Used:

https://linkdeli.com/widget.js?1533216656914

September 6, 2018
Stitched Scallop Shaker Card
Hi Everyone, it’s Tina here today. I have a fun shaker card to share with you using the new Stitched Scallop Circles Die and Stitched Scallop Rectangles Die with the Sun Kissed Sequins Mix. Below are the steps to replicate this card.
- Step 1 – Trim White Cardstock to 8 1/2″ x 5 1/2″, score at 4 1/4″ and fold in half for a vertical side fold card.
- Step 2 – Diecut Double Stitched Rectangles using Patterned Paper. This will be your background.
- Step 3 – Diecut Stitched Scallop Rectangles Die using Patterned Paper (the Die is one up from Background). Diecut Stitched Scallop Circles slightly higher than mid center. (This is your window).
- Step 4 – Using Never Ending Circles Die diecut the patterned paper from Step 2 one die bigger than the Stitched Scallop Circle created from Step 3 (make sure to position the window over the patterned paper). Adhere the background to the front of the card. You will need to diecut an acetate sheet with the same size Never Ending Circles Die.
- Step 5 – Turn over the patterned paper from Step 3 and adhere the acetate using Clear Double Sided Adhesive Tape or Collage Medium. Adhere foam tape all around the circle (2 layers) and to the rest of the panel (2 layers). Use an anti-static powder tool inside the circle at the edges of the foam tape. This will help to remove the stickiness. I have a video of a similar shaker card if you need a visual instruction. You can go here.
- Step 6 – Add sequins. Remove the release sheet from the foam tape. Adhere the circle backside created from Step 4. Use Clear Double Sided Adhesive to the circle and remove the release sheet. Now adhere the whole panel to the front of the card.
- Step 7 – Stamp sentiment from Everyday Brush Strokes using Versamark on patterned paper. Sprinkle black embossing powder and heat it using a heat tool. Diecut Stitched Fishtail Banners to the sentiment. Trim the left side of diecut and adhere to card using Clear Double Sided Adhesive Tape.
This card can be used for any occasion by changing the patterned paper, color and/or sentiment. Below is a link to all Kat Scrappiness Products Used. Thanks for stopping by and have a wonderful day.

Kat Scrappiness Products Used:

https://linkdeli.com/widget.js?1529497022105
June 29, 2018
Stitched Flower Card
Hi Everyone, it’s Tina here today. I have a super fun and fast card to share with you using the new Stitched Scallop Circles Die, Stitched Scallop Rectangles Die along with the Double Stitched Rectangles Die. Below you will find the link to the products used along with the steps to replicate this card.
- Step 1 – Trim White Cardstock to 8 1/2″ x 5 1/2″, score at 4 1/4″ fold in half for a vertical side fold card.
- Step 2 – Diecut Stitched Scallop Rectangles using Black Cardstock. Adhere to card using double sided adhesive tape.
- Step 3 – Diecut Double Stitched Rectangles using Patterned Paper (you want this to be mostly a solid color) Set it aside for now.
- Step 4 – Diecut Double Stitched Rectangles using a Striped Patterned Paper.
- Step 5 – Diecut Stitched Scallop Circles 6 times using different Patterned Paper. About half way through the Striped Patterned Paper adhere the Diecut Stitched Scallop Circles using Collage Medium in the center. Once you have all your Stitched Scallop Circles adhered cut out the top half of the Stripe Patterned Paper.
- Step 6 – Place the Striped Patterned Paper on top of the Solid Patterned Paper and mark the area for the sentiment placement. Stamp Sentiment. For my Hello sentiment I used Versamark Ink and sprinkled Sparkling Embossing Powder then heat set with a heat tool. For my friend I used Versafine Onyx Black Ink.
- Step 7 – Adhere Solid Background to the front of the card using Double Sided Adhesive Tape. Adhere Stripe Patterned Paper to the front of the card using Foam Tape.
- Step 8 – Optional – Add Trim Mix II Sequins Mix to the upper part of the card.
I hope you enjoyed today’s card. This card can be used for any occasion by changing the Color and/or sentiment. Below are links to all the products used. Thanks for stopping by and have a wonderful day!

Kat Scrappiness Products Used:

https://linkdeli.com/widget.js?1528877046279
June 22, 2018
Belated Father’s Day Waffle!
Hi Friends! kel here today to share a fun card for a special somebody!! I gave it to the hubs for Father’s Day last week so I can share it now. =o)

I used a whole bunch of dies on this card, including the brand new Stitched Scallop Circle dies to make my card (I used the 3rd and 4th largest circle dies). I also used the Wonky Wavy Stitched Rectangle dies on my polka-dot layer in the back, and the widest Stitched Fishtail Banner Die to stamp my sentiment on. I was lucky that it worked out that the sentiment fit so perfectly on that die!!

I used the Waffle Lot Stamp Set by Technique Tuesday for this card for the hubs because our middle child has been on a waffle kick recently… We’ve been eating homemade belgian waffles just about weekly!! And for Father’s day, the boys surprised him by making him a Father’s Day breakfast complete with waffles and his favorite breakfast foods! So I thought that this card would have been perfect!!

I just love that the Stitched Scallop Circle dies are nested far apart enough that you can still see the stitching on the bottom layer!! And I fussy cut the hearts out… phew. That’s all I can say about this little things! haha! The sentiment is stamped in this beautifully rich walnut ink and the hearts and waffle were stamped with my trusty Memento Tuxedo Black ink and then hand colored. The Stitched Fishtail Banner, waffle, and hearts are all popped up on some 3D dots/strips for a little extra oomph!!

Thanks for stopping by, see you again soon! Don’t forget to take part in our awesome monthly challenge for your chance to win a $25 Gift Card!!

lovies, =o) kel

Supplies Used (use code kel10 for 10% off your order!):
June 19, 2018