Kat Scrappiness Blog

Tag: Mini slimline card

  • Just for You Butterfly Mini Slimline

    Just for You Butterfly Mini Slimline

    Happy Thursday Friends!

    It’s Sheri here today with an elegant “Just for You” mini slimline card featuring the NEW Fluttering By stamp and die set from Kat Scrappiness Summer Vibes Release!  If you haven’t had a chance to check out the NEW Summer Vibes Release yet, you can find it HERE!!


    Steps to Create Card:

    • Cut White Mini Slimline card base: 3 1/2″ x 6″ (7″ x 6″, scored at 3 1/2″ on 7″ side).
    • Cut White Panel: 3 1/2″ x 6″ and use MSL Quilted Background die to add texture to panel.
    • Cut White Fame using the largest frame from the MSL Frames die set.
    • Cut Gold Mirror by cutting a panel 3 1/2″ x 6″ and cut out a window with the second largest rectangle from the MSL Never Ending die set.
    • Cut 3 White Leaves from the Stitched Foliage Die set.
    • Cut 3 White Butterflies from the Fluttering By die set.
    • Cut 3 Vellum Butterflies from the Fluttering By die set. Next stamp and emboss using gold embossing powder the two outline stamps from the Fluttering By stamp set.
    • Stamp & emboss with gold embossing powder the Just for You sentiment from the Everyday Brush Strokes stamp set.
    • Assemble card. The butterflies (both solid butterfly and vellum butterfly) and sentiment are popped up with foam tape .
    • For embellishment I added gold pearls to the body of the butterflies to hide the foam tape. I also added a few around the stitched foliage.


    Here’s a list of the supplies I used from the store.
    Affiliate links are used at no additional cost to you. Thank you so much for your support!

    Happy Stamping!!

  • Fluttering By Layered Bubbles Mini Slimline

    Fluttering By Layered Bubbles Mini Slimline

    I have a mini slimline card to share with you today and I’m using several of the new products from the June release.  I just can’t resist this Fluttering By stamp and die set or the new stencils!

     

    I started with creating a background using the new Layered Bubbles stencil set.  I used the Honeysuckle, Aqua and Sprout inks from the Concord & 9th collection.   I trimmed the panel down to fit inside the mini slimline lattice frame die that I die cut in a pretty rose pink cardstock.

    I stamped the butterflies from the Fluttering By stamp set in Midnight blue ink and added the second layer in white pigment ink.  I die cut them out and added them to my card with some foam dots.

    I used some leftover Stitched Foliage die cut leaves from a previous project and tucked them behind the butterfly to create a frame for my hello die cut.  This word die is from the Reverse Scallop mini slimline frame die set.

    My card was finished off with 5 Yellow Jewel gems.

     

     

     

     

    Video tutorial:

     [youtube https://www.youtube.com/watch?v=4CnuyfTHZ74]

     

    Supply List:


    https://linkdeli.com/widget.js?id=f5e8378456858c916708

    Thank you for stopping by!  You can find more of my ideas and inspiration at Stamping Imperfection!

  • Happy Retirement

    Happy Retirement

    Happy Saturday, I hope everyone is enjoying their weekend.  It’s Caren here on the blog with a retirement card for you today.  After over 20 years, my hair stylist is retiring – not sure what I’m going to do now!  I’ve created her this fun card using several Kat Scrappiness products.

     

     

    Here is how I created my card:

    • I die using the Mini Slimline Scalloped Edge die from white card stock
    • I used a brick stencil to lightly stencil with gray ink onto part of the panel
    • I die cut from colored card stock the wine bottle and glass from the Wine Not die set and adhered together
    • I stamped Happy from the Happy Day stamp set directly to my panel using versamark ink and gray embossing powder
    • I stamped Retirement from the Happy Day stamp set onto pink cardstock with Versamark ink and gray embossing powder
    • I adhered the wine bottle, wine glass, and retirement sentiment to the panel using dimensional adhesive
    • I added the panel to a gray mini slimline card base
    • I added Pink Lemonade and Gray Opal pearls to finish the card

    Check out the Kat Scrappiness shop where there is a surprise DIE sale going on now!

    Thanks for stopping by.

    – – – SUPPLIES for today’s project– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

     

  • It’s Always Coffee Time Mini Slimline Card and Tutorial!

    Happy Saturday Friends!

    Tasha here sharing a coffee-themed mini slimline card tutorial!

    The Quokka was stamped with black ink and colored with Copic Markers. I love the Quokka from the Everyday Quokka Stamp Set and thought it would be fun to make a coffee-themed card with the little mug!

    The background was created with the cool Mini Slimline Heart Sunburst Die and plaid pattern paper from the Heartfelt Wishes – Slimline Paper Pad. The colors in the plaid paper work perfectly with the coffee theme!

    See my full card tutorial on the Kat Scrappiness YouTube Channel!

    [youtube https://www.youtube.com/watch?v=vEHjzUFfnMU]

    For the sentiment, I selected a heart from the Stitched Scalloped Heart Die Set and embossed the greeting with white fine embossing powder. The “Let’s Get Caffeinated” Stamp Set has several fun coffee-themed greetings and the designs are fun and modern!

    To complete the card I layered a piece of deep orange paper before attaching the card to a white mini slimline card base.

    I hope you enjoyed today’s card and are inspired to create a coffee-themed mini slimline card!
    Also, be sure to check out Kat Scrappiness this weekend and shop the Mother’s Day Sale!

    Have a wonderful weekend!
    Tasha


    https://linkdeli.com/widget.js?id=f5e8378456858c916708

  • Mini Slimline Quokka Birthday Card

    Mini Slimline Quokka Birthday Card

    Sheri here today with a masculine birthday card featuring the adorable Everyday Quokka stamp & die set!

    Do you struggle with masculine cards? I know I do at times. I thought that starting with a ink blended background would be fun and this argyle background was perfect for a masculine themed card!


    Steps to Create Card:

    • Create a Mini Slimline card base:  3 1/2″ x 6″ (Cut card stock to 6″ x 7″,  score at 3 1/2″ on the 7″ side).
    • Cut Blue Mat: 2 15/16″ x 5 7/16″.
    • Cut White Panel for stenciled back ground. Start with a piece of card stock measuring 3 1/2″ x 6″.  Using the Newton’s Nook Argyle Stencil and two shades of blue (GKD Blue Denim & GKD In The Navy) to stencil the background. I found using the Mini Detail Blending Brushes helpful for the stitching. You want to pounce up and down to create the clean lines.
    • Trim White/Stenciled Panel down to 2 13/16″ x 5 5/16″.
    • Cut out a white 2 1/2″ circle from the Never Ending Circle die set. Depending on the look you want I trimmed off to match the blue mat once the card was assembled.
    • Stamp and Color the Quokka and present from the Everyday Quokka stamp set. I stamped with alcohol friendly ink and used copic markers. Then I cut out with the coordinating die set. You can also fussy cut the images out.
    • Stamp sentiment from the Everyday Brush Strokes stamp set with Versamark and emboss with white embossing powder. Now trim into a sentiment strip (approx 2 1/4″ x 3/8″).
    • Assemble card. For dimension I added foam tape to pop up the card panel to the card base, the circle element, Quokka and present. This is optional.
    • For embellishment I added a few enamel dots from the America the Great collection.

    Here’s a list of the supplies I used from the store.
    Affiliate Links used at no additional cost to you. Thank You so much for your support! 

    To Shop Sale, Click Here!

    Happy Stamping!!

  • Mini Slimline Clear Thank You Card

    Mini Slimline Clear Thank You Card

    Hello crafty friends!

    It’s Alicia a.k.a. Crafty Al here to share a look at the clear front mini slimline thank you card that I created using some of the new products from Kat Scrappiness.

    For my patterned papers I used 2 sheets from the Ugly Sweater Slimline Paper Pad and the green polka dot frame on the front was die cut using one of the Mini Slimline Reverse Scallop dies. I made the clear front using a piece of ‘clear cardstock’ from the Slimline Acetate Sheet – 25 pack.

    To decorate the front I used the Thanks Sentiment w/Shadow die set and some snowflakes from the Christmas Funfetti Sprinkle Mix.

       

    To ‘hide’ the personal message from the front of the card I created a smaller inner card that was covered with the fun penguin / santa / gingerbread pattern. From the front it looks like the frame is on the inner card, but it is actually on the front of the acetate. I just love all of the layers you can get with a clear front, but without a lot of bulk. 🙂

    You can check out my video for the full process…

    [youtube https://www.youtube.com/watch?v=pXhA5D_GEVU]

    Thanks for stopping by and I hope you enjoyed today’s card!

    Alicia / Crafty Al

    Related Products:

       Kat Scrappiness

          Mini Slimline Reverse Scallop w/Hello die set, here: http://shrsl.com/375bk

          Thanks Sentiment w/Shadow die set: http://shrsl.com/3av25

          Ugly Sweater Slimline Paper: http://shrsl.com/38yxxum

          Christmas Funfetti Sprinkle Mix: http://shrsl.com/3av26

          Slimline Acetate Sheets

             10 pk: http://shrsl.com/3av1m

             25 pk: http://shrsl.com/3av1c

          Teflon Bone Folder: http://shrsl.com/3av1p

          Embellishment Organizer: http://shrsl.com/37sxi

          Triangle Embellishment Tray: http://shrsl.com/37sxh

       Art Glitter Glue: http://shrsl.com/37svl

    **Some links above are affiliate links. I link them up for your convenience and may receive a small commission, at no extra cost to you. I hope you will consider using the links if you decide to purchase the products I share. 🙂

  • Fall Themed Mini Slimline Card

    Happy Sunday everyone!

    Tasha here sharing a new mini slimline card perfect for the month of November!

    This card features the cute Dress Up Quokka Stamp Set and Reversed Scalloped Mini Slimline w/Hello Die Set! The Quokka couple were stamped with black ink and used the coordinating dies to cut the images out. I also added the little sweaters from the Ugly Sweater Add On Stamp Set. The Ugly Sweater Add On Set is designed for winter/Christmas, but you can use the sweaters any time.

    Check out my video for the full tutorial!

    [youtube https://www.youtube.com/watch?v=M3IC9-Joa9M]

    The Reversed Scalloped Mini Slimline w/Hello Die Set includes several scalloped frames and a layered Hello die. These are also great to use on shaker card or tags!

    Thank you for checking out today’s project and I hope you are inspired to create a fun mini slimline card!

    Tasha

  • You Are Simply Amazing

    You Are Simply Amazing

    Happy Saturday Everyone!

    Sheri here today with a FUN Rainbow Mini Slimline card featuring the NEW Simply Amazing Sentiment w/shadow die and Boxed Sentiment Strips dies from the October 2021 Release!

    Steps to Create Card:

        • Cut Red Card Base 6″ x 3 1/2″ (6″ x 7″, score at 3 1/2″ on 7″ side).
        • Cut White Inside layer 5 7/8″ x 3 1/4″
        • Cut White Scallop panel using from the Scalloped Edge Mini Slimline die ( use larges die: 5 11/16″ x 3 1/8″
        • Cut Rainbow strips (red, orange, yellow, green, aqua, blue, & purple) using the 3/4″ wide strip from the Boxed Sentiments Strips die. Now attach them to a piece of printer paper and you will then cut out using the Never Ending Mini Slimline die (5″ x 2 1/2″).
        • Cut Simply Amazing Sentiment w/shadow out of white card stock & vellum. You will glue the white word cut out to the vellum shadow panel.
        • Heat Emboss “You Are” sentiment from the Hearty Greetings stamp set on a pieced of scrap black card stock with white embossing powder. You will then cut it out with the 3/8″ wide Boxed Sentiments Strips die.
        • Assemble card.
        • For embellishment I added  a few Clear Solid Round Confetti Mix.

    Here’s a list of the supplies I used from the store.
    Affiliate Links used at no additional cost to you. Thank You so much for your support!



    To SHOP SALE,click HERE!

    Happy Stamping!!

  • “I Miss You” Mini Slimline Card

    “I Miss You” Mini Slimline Card

    Hey Crafty Peeps! Priscilla here from Nubble Light Designs.Today I am sharing a card I made using the just released Reversed Scalloped Mini Slimline with Hello die set from Kat Scrappiness.


    To make this card, I created a cool ink blend with 3 Distress Oxide inks through a DIY cardstock stencil created using a rainbow slimline die. Sounds confusing? Keep reading to see how I did this.

     

    Card Details:

    1. Created a white cardstock mini slimline card base (6″ x 7″, scored at 3.5″)and set it aside.
    2. Die cut the top layer using the new Reversed Scalloped Mini Slimline with Hello die set and secured the scalloped frame to the middle portion using tape on the back.
    3. Made a DIY stencil by die cutting a rainbow shape opening in white cardstock using the Slimline Rainbow Die,laid it over my card front, and blended “Black Soot,” “Seedless Preserves,” and “Carved Pumpkin” Distress Oxide inks through it.

    4. Used the same ink blend over the “Hello” die cut and backed it with 2 more die cut layers in black to give it more dimension.
    5. Die cut one of the clouds from the same Slimline Rainbow Die collection, and stamped “I miss you” from the Quokka’n Up stamp set, adding 2 more die cut layers in black.
    6. Adhered both die cut sentiments above and below the ink blended opening and then adhered this finished layer onto the mini slimline card base.

    Thank you so much for stopping by! Don’t forget to check out what’s NEW in Kat’s Shop, and follow my blog and Instagram for more “Kat Scrappiness Amazingness”!

    Stay Safe . . .

    Priscilla 🌈

    The supplies I used are listed and linked below. I would be so grateful if you use these affiliate links  to grab your Kat Scrappiness Goodies! No extra cost to you!

  • Happy Halloween

    Happy Halloween

    Happy Monday everyone!  I’ve got a fun and spooky mini slimline Halloween card to start off your week.

    I started the card by ink blending the front panel of my slimline card (3.5 x 6 inches) with distress oxide inks – Carved Pumpkin, Picked Raspberry, Seedless Preserves, and Black Soot.  I used a spray bottle on the panel to make the panel splotchy.  I then die cut all the pieces (except the pumpkin) from the Crafters Essentials Halloween die set.  I inked up the edges of the tomb stones with Black Soot and did a little ink blending on the moon with Wild Honey.  I adhered the tree, fence, and moon directly to the panel with liquid adhesive.  I added dimensional adhesive to the tombstones and bats.  I stamped my sentiment – Happy Halloween – from the Toil & Trouble Layered stamp set to finish the card.

    Thanks for stopping by!

    – – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– –

    Here is a link to the Kat Scrappiness shop and direct links for products I used on today’s card.

    – – – SUPPLIES for today’s project– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –