Kat Scrappiness Blog

Tag: he is risen dies

It’s Been SOOO Long
Happy Monday everyone!

My card for today features Kat Scrappiness’ first stamp set – Lola the Giraffe.

I colored the giraffe and butterflies from the stamp set with Copic markers and used my Silhouette Cameo to cut them out. On a piece of white card stock, I adhered a piece of patterned paper that looked like a giraffe pattern and a die cut of the grass from the He is Risen die collection. I then used one of the Distressed Edged Rectangle dies on this panel. I layered that panel on a piece of green card stock that was slightly bigger.

I die cut a banner from kraft card stock using one of the Stitched Fishtail Banner dies and heat embossed my sentiment. On my white card base, I adhered a slightly smaller piece of coordinating patterned paper. I then adhered my distressed edge panel. Finally, I adhered the giraffe and sentiment banner using dimensional adhesive.

Thanks for stopping by!

– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– –

Here is a link to the Kat Scrappiness shop and direct links for products I used on today’s cards.

– – – SUPPLIES for today’s project– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
August 17, 2020
New Slimline Dies!
Hi, I hope everyone is staying safe and healthy!

Did you notice the Kat released two new slimline nesting die sets earlier this week? One is Embossed Edged and the other is Stitched Scalloped. Here is a look at them.

Today, I’m sharing two cards I created using the new slimline dies. My card bases measure 8.5 x 3.5 inches. I cut my pieces of heavy weight card stock 8.5×7 and then scored at 3.5 on the 7 inch side.

My first card uses the largest Embossed Edged slimline die from the set. I die cut this with white card stock. I then used a stencil, a blender brush, and blue distress ink to create the clouds. The hills were created using a die from the Crafters Essentials Easter die set and the white cloud die cuts are from the He is Risen die set. I adhered these directly to my card using wet adhesive. I layered this panel on a piece of gray card stock leaving about a 1/16th edge and adhered it to my white card base.

I stamped and colored, using Copics, the sloth from the Stewart the Sloth stamp set. I then cut it out using my Silhouette machine. I stamped the sentiment “Hang in There” from the same stamp set in black on gray card stock that I had die cut using the Stitched Fishtail banner dies. I added these to the card using dimensional adhesive.

My second card uses the largest Stitched Scalloped slimline die from the set and a piece of pink polka dot patterned paper. I adhered this to a piece of dark gray card stock that is slightly larger and glued this panel to my light gray card base. From that same dark card stock, I die cut the congrats letters three times from the Condensed Lowercase Alphabet dies. I glued the layers together. This gives a little bit of dimension to the letters on the card. I adhered these to the card base and added a few sparkling clear droplets.

Thanks for stopping by and I can’t wait to see what everyone creates with these new dies.

– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– – –– –

Here is a link to the Kat Scrappiness shop and direct links for products I used on today’s card are below.

– – – SUPPLIES for today’s project– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
April 17, 2020
“Bunny-chaun” Card |The Easter Bunny Meets a Leprechaun | Giveaway!
Hi Everyone, it’s Priscilla here. Today I have a special card that celebrates both St. Patrick’s Day and Easter . . . together! And stay tuned. At the end of this blog post, you can find out how to win the Kat Scrappiness “Crafters Essentials-Easter” die collection, on MY BLOG, Nubble Light Designs.

Kat Scrappiness just released the “Build-A-Bunny” stamp set and dies. With St. Patrick’s Day and leprechauns right around the corner, and Easter soon after, I thought it would be fun to somehow “merge” the two together –Viola! Meet the “Bunny-chaun” . . . where “Build-a-Bunny” takes residence in a leprechaun’s pot of gold. And the whole card scene was created using the Doodlebug “Lots O’ Lucky” paper pad and embellishments.

I started by die cutting the bunny and stamping its features in green ink. I added a tail and then cut off his ears and “flopped” them downward, so he can could wear a leprechaun hat. I modified the long bow image that come in the set to make it look more like a bow tie.

To make the black “pot of gold,” I removed the handle on the Easter basket die cut from the “Crafters Essentials-Easter” die collection. I punched out the gold coins with a circle punch from gold glitter card stock and placed them around the edges of the pot, and then inserted the “Bunny-chaun.” I finished off the bottom of the card using the grass die from the Kat Scrappiness “He is Risen” die collection. The die cut sentiment, rainbow, and gold hearts are all from the Doodlebug “Lots O’ Lucky” embellishment pack.

GIVEWAY TIME!!!!!

I am giving away a Kat Scrappiness “Crafters Essentials-Easter” die collection, on MY BLOG, Nubble Light Designs.

To enter the giveaway, simply:
- Leave a “Like” on MY BLOG, Nubble Light Designs. (NOT THIS Kat Scrappiness POST)
- Subscribe to my “Nubble Light Designs” blog.
- Post a comment.
One lucky winner will be mailed this prize. Good Luck!

Thank you so much for stopping by! Don’t forget to check out what’s NEW in Kat’s Shop, and follow my blog and Instagram for more “Kat Scrappiness Amazingness”!

Priscilla ?☘

The supplies I used are listed and linked below.

SUPPLIES
March 11, 2020
Sweet Spring and Easter

Hello Friends, Waleska here better known as craftinglovew super happy to be a Guest Designer for this Month. I love Spring and Easter so when I saw the newest release from Kat Scrappiness I was very excited to create with the Amazing new release.

I created a lot of cards with the new dies using soft spring colors yellow, pink, purple and teal, I wanted a collection of cards using a soft and sweet color combo.

CARD DETAILS #1

The new Filigree Egg die is so beautiful and detailed definetely my favorite. To create this card I started by inking a white card base with Oxide Inks in colors Spun Sugar, Squeezed Lemonade and Shaded Lilac, then I die cut the Filigree Egg die and I adhere it to a Vellum piece. I put some Chicken or Egg Sequins. I cut the Filigree Egg Die again on a white card base but this time I used only the egg shape and adhere the ink blended Filigree to that front panel. I used a gray card base and die cut the Easter Blessings word die but only used the Easter word as well as the bow from the Easter Essentials from Kat Scrappiness with the same colors I used on the card.

CARD DETAILS #2

For my second card I used the Faberge Egg with Cross new die. I cut this beautiful die cut from a pink shimery paper and I ink blended with Squeezed Lemonade Oxide Ink where I wanted to adhere this diecut. I cut a strip of violet cardstock for the bottom of my front panel and with the same violet cardstock I cut the Happy Easter Word die with shadow but used only the word Easter for this one to finish I adhere some Chicken or Egg Sequins.

CARD DETAILS #3

For my last card I used a stencil for the background with oxide inks in colors: Squeezed Lemonade, Spun Sugar, Shaded Lilac and Cracked Pistachio I cut the crosses from the He is Risen dies and He is Risen word and Shadow dies with white cardstock and pink cardstock for the word shadow.

I had so much fun creating this three cards, I hope you feel inspired to create Spring or Easter cards and don’t forget to check out the new Kat Scrappiness Release with all this amazing new products! Have a great day and remember Stay Creative!

March 9, 2020